Many times there is an odor in a room, but it may not be clear where it is coming from.
These lamps can help determine the location of an odor and make the remediation job easier.

These professional lamps are designed to display ultraviolet light in long wave frequencies.
Long wave UV light is required to find contaminants such as urine and mold. 

Most cheaper UV lamps only display short wave frequencies which are not adequate to locate contaminants.
All the lamps we sell feature long wave ultraviolet technology.

Brightness intensity level is also important as low powered lamps can only find contaminants in a very small area. Cheaper UV lamps do not have the brightness levels required to find stubborn contaminants in the way that our lamps do.

With it's extra power it can illuminate a larger area than the small UVL-4F.

It features a true long wave UV bulb that is a must to find contaminants such as mold and pet urine.

Lightweight but sturdily built, it features an ergonomic handle meant for easy operation.

Specifications:
6 watt self ballasted long wave (365nm) lamp.
Intensity - 1,350  micro watts per centimeter squared.
Input voltage - 110v 60 Hz

It features a powerful self ballasted 160 watt long wave bulb which will illuminate most normal sized rooms to aid in mold and bacterial detection.

Low wattage UV lamps can only illuminate small areas directly in front of them, but the B100SP is powerful enough to find contaminants in a larger area.

A cool touch plastic, heat resistant lamp housing, and the pistol grip handle make this unit portable and easy to use.

A special bulb guard protects the UV bulb.

Specifications:
160 watt self ballasted long wave (365nm) lamp.
Intensity - 11,600  micro watts per centimeter squared.
Input voltage - 110v 60 Hz

Important! Please note that protective eye goggles must be worn when using an ultraviolet lamp of this intensity. Protective eye goggles can be purchased along with this unit on our order page. UV Eye Goggles Price $24.99

The XT-14000 and the XT-28000  are true professional machines.

To kill mold and remove strong odors there needs to be as high an ozone concentration as possible in the room.  Since ozone breaks down within 15 to 30 minutes it is important to keep producing large amounts of it to keep the ozone concentration at a sufficient kill level.

Using a smaller machine twice as long is not the same as using a higher powered machine since the ozone breaks down so quickly. 

With a smaller machine the ozone level never has a chance to "catch up" to the required parts per million concentration needed to kill the mold or bacteria.

It is always recommended to use as large a machine as possible for mold and bacterial problems.

Professionals may choose our XT-28000 to treat larger areas.