It is designed for odor removing high ozone shock treatments of unoccupied areas. 

It features a brand new patented method of corona discharge ozone generation, that's the latest in 21st century technological design.

The new style, patented ozone generator elements inside the unit require no maintenance. 
They produce Zero Nitrogen Oxides that can make some ozone generators dangerous and offensive.

The XT-6000 Ozone Blaster combats mold and mildew odors with high ozone shock treatments by attacking and destroying the offending organisms. These are the machines homeowners and professionals use to kill mold spores in high humidity and flooding situations.

Great for removing smoke & mold odors in Basements, Motel Rooms, Restaurants, and Bars.
Operates at full ozone power even in high humidity environments. 

Industry Standard 4" Reinforced Intake & Output Vents allow for easy  routing of ozone to any desired area.

The Countdown Timer runs the machine for  10, 20, 30, minutes, or up to 2 1/2 hours and then it shuts the unit off. The Continuous mode allows for longer, or overnight applications.  It's smart chip remembers the timer setting last set even if the unit is unplugged!

An electronic protection circuit and fuse prevent the internal components from overload & burnout.

The easy-to-replace, 3M filters are only $2.00 each, and lasts for months. 
They keep the inside of the unit dust free so that ozone output does not drop as in may ozone generators as they become dirty.

PVC plastic is very sturdy and prevents internal rust and oxidation.
Even the electronics are encased in silicone to prevent any oxidation of the internal components.
In other words, these units will not self deteriorate in a high ozone environment as many other ozone generators do.

Uses very little electricity.  Completely portable.
Multiple XT-6000's can be used at the same time for even more ozone output power.

These units are not meant for occupied areas, as they are too powerful to be turned down to acceptable air purification ozone levels. They are only to be used in unoccupied spaces.
 
 

Mold-Kill XT-6000

Ambient room temperature: 80.3 F
Room size: 17 x 12 x 8.3 foot ( 1693 cubic ft ), no ventilation
Ozone Concentration: 22 ppm, Ozone Air Flow Rate: 82 CFM
Ozone Output Per Hour: 6000mg/hr. 
 

Test conducted with the measuring instrument at a 12 foot distance from the ozone generator.

Test Conclusions:

The ozone generator was found to easily obtain an ozone concentration level of at least 0.3 ppm within 10 minutes of operation, no matter where in the room the unit was placed, or where the ozone concentration was measured.

It has been previously proven in University of Pennsylvania studies that E coli bacteria will be killed at average 0.28 ppm ozone concentration within two hours. 
CLICK HERE to view that study.

In our opinion it can then be reasonably concluded that the Mold-Kill XT-6000 ozone generator will kill 99% of all E coli bacteria, in a 1700 cubic foot room within a time period of 60-90 minutes.

We thus make these conclusions since higher ozone concentrations than needed to kill 
E coli bacteria can be obtained in a shorter period of time with the Mold-Kill XT-6000.

Other recent studies have also proven that ozone concentrations within 0.10 ppm and 0.40 ppm
will kill most any bacteria or viruses in a relatively short period of time.

It is then reasonably safe to conclude that most other pathogens will also be destroyed by the Mold-Kill XT-6000 within a short period of time.

It is important to note that  these high levels of ozone needed to kill bacteria, can only be used in rooms unoccupied of people, plants, and animals.

Test conducted October 2001 
 

XT-6000 Price $799.99 US Shipping $15