The odor of mold indicates there are thousands of live mold spores floating in the air. 
These spores may be breathed in and cause illness, or aggravate pre-existing respiratory conditions.

Untreated mold can make you permanently ill, and devalue your home.

Ozone helps purify areas that are infected with mold, black mold, and other offensive bacteria by helping to kill the offending organisms. 

High Ozone Shock Treatments blasted into unoccupied rooms can safely kill mold spores and sanitize infected areas. 
Low levels of air purification ozone can be used to kill airborne spores.

Ozone can also be used at low levels to purify the air and eliminate mold odors.

Ozone acts 3000 times faster than chlorine as a bactericide, and it is the strongest oxidant commercially available for air & water treatment.

Ozone is a scientifically proven Mold Killer.   Click Here for scientific proof.

OZONE IS VERY EFFECTIVE IN KILLING MOLD by the use of unoccupied room High Ozone Shock Treatments.  We show proof of this on our Ozone Studies web page.

Mold needs three things to grow: Moisture, a nutrient, and a warm environment over 60 degrees.
The nutrient might be wallboard, wood studs, or even dead dried mold itself.
This is why spraying mold with bleach is only a temporary solution.
Once the moisture and heat return the mold can begin growing again.

Ozone can kill mold on contact, even the loose spores you cannot see, in places you cannot see.
That's why it can be a much more complete cure than just using a bleach solution alone.

While UV Ultraviolet in duct air purifiers are now popular, their ozone output is very, very low.
Typically only 50 - 100 mg/hr or less. 

UV ultraviolet lamps are ineffective in killing mold and bacteria.
This is a direct quote from General Electric, the manufacturer, concerning their germicidal UV lamps.  "Once mold has already formed, ultraviolet energy will NOT eliminate it."

Ozone is considered an unstable gas, meaning it cannot exist for more than a very short time.

Very soon after it is formed, nature forces the third oxygen atom of Ozone to break free, and oxidize bacteria, viruses and pollutants.

Bacteria, viruses, and mold are all destroyed by this process.

All that remains after reactions with ozone are the harmless compounds of pure oxygen (O2), carbon dioxide (CO2), and hydrogen (H2). 

The introduction of low levels of ozone leads to cleaner air to breathe.

Ozone can be used at very low levels for air purification, and at very high levels to perform
High Ozone Shock Treatments that kill viruses, bacteria, mold, and other germs. 

Our machines are much more than simple "air cleaners",  they are also very powerful professional tools for bacterial sterilization.

Ozone can be used at very low levels for air purification, and at very high levels to perform
High Ozone Shock Treatments that kill bacteria, & mold.

Our machines are much more than simple "ionizers",  which do not have the ability to kill substantial amounts of bacteria.

The United States Department of Agriculture states that ozone can kill 90% of 
MOLD MYCOTOXINS. Click Here to read that report.

Mold-Kill uses a patented form of corona discharge that works much better than UV Ultraviolet bulbs.  Click Here to read where General Electric states that UV bulbs do not kill mold.

Air-Zone® presents...  THE WORLDS FIRST REMOTE  CONTROLLED AIR PURIFIERS!!! The new XT-400, and XT-800 set the standard for the industry. Featuring a patented 21st century design,  Wireless Remote Control, Electronic control panel,  fully variable ozone levels,  and two Built in Timers! Capable of High Ozone Mold Killing Shock Treatments. CLICK HERE to compare our prices and features to  Alpine / Living Air / Ecoquest Air Purifiers.

XT-400 / XT800 Click Here to see our entire line

Stachybotrys Chartarum  (Toxic Black Mold) is a greenish black fungus found worldwide.  It colonizes in most building materials including, dry wall, carpeting, wall paper, fiber board, ceiling tiles, and thermal insulation.  The fungus can be wet and slimy to the touch. There are about 15 species of Stachybotrys world-wide.  This toxic mold grows in any area that experiences a period of high moisture.

________________

Molds reproduce by making spores that cannot be seen without magnification. Mold spores waft through the indoor and outdoor air continually. 

When mold spores land on a damp spot indoors,  they begin growing and multiplying, and soon the mold problem is out of control. 

Many types of molds exist. ALL MOLDS have the potential to cause health effects.

Exposure to certain types of mold can cause permanent, irreversible lung and brain damage, as reported in the Journal of the American Medical Association.

Aspergillus niger is a type of mold widespread to indoor environments. It causes breathing problems and skin infections.

A one time flood can lead to a permanent mold problem. Mold can be killed and it's growth retarded by high doses of ozone.  Mold will NOT go away in it's own.

Prevent damage to building materials and furnishings, save money, and avoid potential health risks by preventing mold growth with ozone.

A sensible mold remediation plan including periodic High Ozone Shock Treatments help retard mold growth and eliminate mold odors.
 

Molds produce allergens that can trigger allergic reactions, and asthma attacks in people who are allergic to mold. 

If mold grows out of control for a long period of time, the only solution may be condemning the property and burning the structure to the ground.

By use a mold remediation plan, and an ozone generator, mold growth can be controlled in your home.

The reduction of moisture, the removal of all visible mold, and the disinfection of surfaces with chlorine bleach and ozone, is the best way to combat a mold problem.

If you smell mold there are live mold spores floating in the air.
Breathing in mold spores leads to respiratory distress.

Ozone air purification, and high ozone blasting of unoccupied rooms, may be a necessary treatment to kill the mold in your home.

Studies by the United States Department of Agriculture state that ozone will kill 90% of mold mycotoxins leftover in dead mold spores. CLICK HERE to read that report.

Mold-Kill Ozone Generators use a patented form of corona discharge that works much better than UV Ultraviolet bulbs. Click Here to read where General Electric states that Ultraviolet Light and UV bulbs do not kill mold.

IONIZATION may make the air smell fresher, but it is not an organism killing bactericide in the way that ozone is.  Ozone is the best way truly remove mold odors, and retard mold growth.

IONIZATION is NOTHING MORE than static electricity, and it has no organism killing ability. 
In fact if you use ionization to try and control mold, the negative ions will drive the floating mold spores to your walls, floor and ceiling. 

Six months after you start using an ionizer you will have MORE mold spores and bacteria collected in your home than before you started!   Mold testing has proven this fact.

Air-Zone® Ozone Generators can help kill Florida Mold.

Our mold killing ozone generators are being successfully used by homeowners and professionals all over Florida to combat toxic mold.

Our simple, do it yourself mold test identifies dangerous molds & mildew in 48 hours. 

Optional lab analysis is available to indicate the exact count and type of mold & mildew present.

The kits may be used one time.  For multiple area testing additional kits will be required.

Mold testing is the only way to know what kind of mold you have.  Testing is the recommended method to know if you have killed the mold after remediation.

Air-Zone's patented ozone elements are in a permanently molded housing, that require NO adjustment whatsoever. 
They also do not produce any measurable amounts of Nitrogen Oxides.

Our elements use 24 carat gold plating on our elements internal components to help prevent corrosion. 
The use of high temperature, shatter resistant tempered glass is also incorporated in our innovative U.S. Patented ozone elements.

Old style ozone "plates" consist of flimsy easily corroded steel screens and delicate thin pieces of glass or mica which must ALWAYS be in perfect alignment.

We do not use MICA ozone plates in our ozone generators.

MICA is the cheapest and worst material to use in an ozone plate. 
MICA easily breaks, flakes apart, burns, and shorts out the generator. 
Stay far away from any ozone generator using a MICA ozone plate.

Click Here to learn why our US patented ozone elements are far superior than "old style" mica ozone plates.

If not cleaned and aligned constantly, old style ozone "plates" will produce less ozone, and possibly even spark out dangerous high voltage electricity.

Air-Zone's® patented ozone elements solve all these problems.

Old style ozone "plates", first designed in the 1800's,  must be removed, scrubbed clean, dried, and be meticulously reassembled, or they will not work correctly. Even with all that work, their life span is notoriously short.

Air-Zone's® low cost, patented ozone elements can be quickly cleaned with the special included element cleaning tool we include with every ozone generator.  They can be replaced in minutes with a screwdriver.

Old style mica ozone "plates" consist of 4 separate parts. Each of the 40 pieces in A 10,000 mg/hr ozone generator must be meticulously installed and aligned for the ozone machine to work properly.

Our corona discharge elements work much better than UV Ultraviolet bulbs.  General Electric, the manufacturer or UV bulbs, states that ultraviolet light does not kill mold.