The odor of mold indicates there are thousands of live mold spores floating in the air. 
These spores may be breathed in and cause illness, or aggravate pre-existing respiratory conditions.

Untreated mold can make you permanently ill, and devalue your home.

Ozone helps purify areas that are infected with mold, black mold, and other offensive bacteria by helping to kill the offending organisms. 

High Ozone Shock Treatments blasted into unoccupied rooms can safely kill mold spores and sanitize infected areas. 
Low levels of air purification ozone can be used to kill airborne spores.

Ozone can also be used at low levels to purify the air and eliminate mold odors.

Ozone acts 3000 times faster than chlorine as a bactericide, and it is the strongest oxidant commercially available for air & water treatment.

Ozone is a scientifically proven Mold Killer.  Click Here for scientific proof.

OZONE IS VERY EFFECTIVE IN KILLING MOLD by the use of unoccupied room High Ozone Shock Treatments.  We show proof of this on our Ozone Studies web page.

Mold needs three things to grow: Moisture, a nutrient, and a warm environment over 60 degrees.
The nutrient might be wallboard, wood studs, or even dead dried mold itself.
This is why spraying mold with bleach is only a temporary solution.
Once the moisture and heat return the mold can begin growing again.

Ozone can kill mold on contact, even the loose spores you cannot see, in places you cannot see.
That's why it can be a much more complete cure than just using a bleach solution alone.

While UV Ultraviolet in duct air purifiers are now popular, their ozone output is very, very low.
Typically only 50 - 100 mg/hr or less.

UV ultraviolet lamps are ineffective in killing mold and bacteria.
This is a direct quote from General Electric, the manufacturer, concerning their germicidal UV lamps.  "Once mold has already formed, ultraviolet energy will NOT eliminate it."

Ozone which is 100% oxygen, is considered an unstable gas, meaning it cannot exist for more than a very short time.

Very soon after it is formed, nature forces the third oxygen atom of Ozone to break free, and oxidize bacteria, viruses and pollutants.

Bacteria, viruses, and mold are all destroyed by this process.

All that remains after reactions with ozone are the harmless compounds of pure oxygen (O2), carbon dioxide (CO2), and hydrogen (H2). 

The introduction of low levels of ozone leads to cleaner air to breathe.

Ozone can be used at very low levels for air purification, and at very high levels to perform
High Ozone Shock Treatments that kill viruses, bacteria, mold, and other germs. 

Our machines are much more than simple "air cleaners", they are also very powerful professional tools for bacterial sterilization.

Ozone can be used at very low levels for air purification, and at very high levels to perform
High Ozone Shock Treatments that kill bacteria, & mold.

Our machines are much more than simple "ionizers", which do not have the ability to kill substantial amounts of bacteria.

The United States Department of Agriculture states that ozone can kill 90% of 
MOLD MYCOTOXINS. Click Here to read that report.

Mold-Kill uses a patented form of corona discharge that works much better than UV Ultraviolet bulbs.  General Electric states that UV bulbs do not kill mold.

Ozone Kills MOLD!!! Mold and bacteria can be safely killed by blasting out unoccupied rooms with high levels of ozone. Click Here to play our Mold Killing Movie!

Mold exists everywhere.	Outdoor mold creeps toward your house.	Mold finds its way in through windows and doors.
Mold grows on inside walls.	Mold begins to infect the entire home.	Mold eventually grows on your belongings.
An AirZone® Ozone Generator can produce high levels of ozone in unoccupied areas.	High powered ozone travels and kills mold and odors all through the entire room.	Each room of the house can be blasted with an Ozone Treatment to sterilize them of mold.

Our Air-Zone® XT-6000 ozone generator can be placed in a basement, crawlspace, or any other room that has mold in it. Easy to perform High Ozone Shock Treatments done on a scheduled basis can help rid your home of deadly mold. High levels of ozone, blasted into unnocupied areas, are very effective in killing all types of mold. Why pay professionals for repeated treatments when you can do it yourself? It is a proven fact that ozone KILLS mold. Click Here for scientific proof.

Stachybotrys Chartarum - Toxic Black Mold is a greenish black fungus found worldwide.  It colonizes in most building materials including, dry wall, carpeting, wall paper, fiber board, ceiling tiles, and thermal insulation.  The fungus can be wet and slimy to the touch. There are about 15 species of Stachybotrys world-wide.  This toxic mold grows in any area that experiences a period of high moisture.

Molds reproduce by making spores that cannot be seen without magnification. Mold spores waft through indoor and outdoor air continually. 

When mold spores land on a damp spot indoors,  they begin growing and multiplying, and soon the mold problem is out of control. 

Many types of molds exist. ALL MOLDS have the potential to cause health effects.

Exposure to certain types of mold can cause permanent, irreversible lung and brain damage, as reported in the Journal of the American Medical Association.

Aspergillus niger is a type of mold widespread to indoor environments. It causes breathing problems and skin infections.

A one time flood can lead to a permanent mold problem. Mold can be killed and it's growth retarded by high doses of ozone.  Mold will NOT go away in it's own.

Prevent damage to building materials and furnishings, save money, and avoid potential health risks by preventing mold growth with ozone.

A sensible mold remediation plan including periodic High Ozone Shock Treatments help retard mold growth and eliminate mold odors.

________________

Molds produce allergens that can trigger allergic reactions, and asthma attacks in people who are allergic to mold. 

If you smell mold there are live mold spores floating in the air.
Breathing in mold spores leads to respiratory distress.

If mold grows out of control for a long period of time, the only solution may be condemning the property, and burning the structure to the ground. This happens all the time.
 
 

The reduction of moisture, the removal of all visible mold, along with the disinfection of all surfaces with chlorine bleach and ozone, is the best way to combat a mold problem. The high ozone blasting of unoccupied rooms, is the most effective method to kill the mold in your home. By the use of a mold remediation plan, and an ozone generator, mold growth can be controlled in your home.

By the use of a mold remediation plan, and an ozone generator, mold growth can be controlled in your home.

Studies by the United States Department of Agriculture state that ozone will kill 90% of mold mycotoxins leftover in dead mold spores. CLICK HERE to read that report.

Unlike ionizers which simply spread mold around your home and can't possibly kill it, ozone will actually kill the live mold spores.

Mold-Kill's Ozone Generators use a patented form of corona discharge that works much better than UV Ultraviolet bulbs. General Electric, the manufacturer of UV lamps, states that Ultraviolet Light and UV bulbs do not kill mold.

High concentrations of OZONE pumped into ductwork can help rid ductwork of moldy odors, and kill DEADLY MOLD.

High levels of OZONEare safe to use in unoccupied spaces to kill MOLD.

IONIZERS OR AIR FILTERS WILL NOT KILL MOLD SPORES!

IONIZATION may make the air smell fresher, but it is not an organism killing bactericide in the way that ozone is.  Ozone is the best way truly remove mold odors, and retard mold growth.

IONIZATION is NOTHING MORE than static electricity, and it has no organism killing ability.
In fact if you use ionization to try and control mold, the negative ions will drive the floating mold spores to your walls, floor and ceiling.

Six months after you start using an ionizer you will have MORE mold spores and bacteria collected in your home than before you started!   Mold testing has proven this fact.

Ionizers electronically glue 90% of the bacteria in the air to all the surfaces in the room. In our opinion the use of an ionizer that claims to "remove" dust actually makes an area  MORE UNSAFE because the bacteria level will constantly be increasing.  Even those ionizers that claim to collect the dust on rods or grids are only grabbing about 5% of the dust in the air.  The rest is "electronically glued" to your walls, floor, and ceiling. It does NOT all just "drop to the floor" as some may claim. One consumer guide states that: "Ionics do little to clean the air. If you own one, try returning it for a refund!" Ionizers make the air smell fresh and clean, and the air may even have less dust in it, but it's foolish to ever use an ionizer because in the long run the dust and bacteria count will INCREASEin your home. It's a short term solution that creates a greater long term problem.

Air-Zone's patented ozone elements are in a permanently molded housing, that require NO adjustment whatsoever. 
They also don't produce dangerous Nitrogen Oxides.
 

Air-Zone® uses 24 carat gold plating in our United States Patented ozone elements to help prevent corrosion. We also use high temperature, shatter resistant, tempered glass in our innovative ozone elements.

Old style ozone "plates" consist of flimsy, easily corroded, steel screens and delicate, thin pieces of glass or mica, less than a millimeter thick.
They must ALWAYS be kept perfect alignment or there is a chance that screens will touch and the transformer will short out and become a fire hazard.

We do not use MICA ozone plates in our ozone generators.

MICA is the cheapest and worst material to use in an ozone plate.
MICA easily breaks, flakes apart, burns, and shorts out the generator. 
Stay far away from any ozone generator using a MICA ozone plate.

Click Here to learn why our US patented ozone elements are far superior than "old style" mica ozone plates.

If not cleaned and aligned constantly, old style ozone "plates" will produce less ozone, and possibly even spark out dangerous high voltage electricity.

Air-Zone's® patented ozone elements solve all these problems.

Old style ozone "plates", first designed in the 1800's,  must be removed, scrubbed clean, dried, and be meticulously reassembled, or they will not work correctly. Even with all that work, their life span is notoriously short.

Air-Zone's® low cost, patented ozone elements can be quickly cleaned with the special included element cleaning tool we include with every ozone generator.  They can be replaced in minutes with a screwdriver.

Old style mica ozone "plates" consist of 4 separate parts. Each of the 40 pieces in a competitors 10,000 mg/hr ozone generator must be meticulously installed and aligned for the ozone machine to work properly.

Our corona discharge elements are many more times powerful than UV Ultraviolet bulbs.

Ozone has been used for over a century to purify drinking water. 
Ninety percent of the worlds drinking water, including most bottled water, is ozone treated to kill germs and bacteria. 

Ozone easily destroys E coli and Salmonella bacteria as well as many other types of germs in drinking water.

Purifying water with the XT-301 could not be more easy.
A simple air hose leads to an aquarium type rock that bubbles the ozone through water.  Place the hose in a gallon, or larger jug of water, and in less than 15 minutes you will have crystal clear, bacteria free, water.

Purifying meats, fruits, and vegetables with the XT-301 is also very simple. 
A simple air hose leads to an aquarium type rock that bubbles the ozone through water. 

Place the hose in a bowl of water that contains the food.

Set the automatic timer for the 15, 30, or 45 min preset time and watch the as ozone bubbles through the water and purifies the food.
Since the machine will turn off automatically after it's preset time, all you have to do is set it and forget it.

Freshly ozanated water can also be used in a spray bottle to disinfect surfaces.

Unlike competitors machines that require you to buy separate machines for purifying water and food, the XT-301 can easily do both jobs.

With the Air-Zone® XT-301  you can purify water and food in ANY container, not just a special container that other brands offer you.